diff options
| author | NIIBE Yutaka <gniibe@fsij.org> | 2015-07-30 20:35:21 +0900 |
|---|---|---|
| committer | NIIBE Yutaka <gniibe@fsij.org> | 2015-07-30 20:35:21 +0900 |
| commit | 1d38c24233b3c061cedf503bf44b1307bb0e1fa2 (patch) | |
| tree | 55f3fe8f7aa732041adf9cd4f0a5e249ef0df07d | |
| parent | a9de53c36be5ca31974cbf3c7903ca5cf7f7fff2 (diff) | |
Add Nucleo
| -rw-r--r-- | AUTHORS | 2 | ||||
| -rw-r--r-- | ChangeLog | 7 | ||||
| -rw-r--r-- | NEWS | 12 | ||||
| -rw-r--r-- | board/board-st-nucleo-f103.h | 45 |
4 files changed, 65 insertions, 1 deletions
@@ -9,6 +9,8 @@ Kaz Kojima: Kenji Rikitake: Added ST Dongle support. board/board-st-dongle.h + Added ST Nucleo F103 support. + board/board-st-nucleo-f103.h NIIBE Yutaka: Write the library: @@ -1,6 +1,11 @@ +2015-07-30 Niibe Yutaka <gniibe@fsij.org> + + * board/board-st-nucleo-f103.h: New. Contributed by Kenji + Rikitake. + 2015-07-29 Niibe Yutaka <gniibe@fsij.org> - * board/board-st-dongle.h: New. + * board/board-st-dongle.h: New. Contributed by Kenji Rikitake. * board/board-*.h (FLASH_PAGE_SIZE): Remove. @@ -3,6 +3,18 @@ NEWS - Noteworthy changes * Major changes in Chopstx 0.07 + Released 2015-07-31 + +** New board support: ST Nucleo F103 +It is contributed by Kenji Rikitake. + +** New board support: ST Dongle +It is contributed by Kenji Rikitake. +It's the ST-Link/V2-1 part of ST Nucleo F103. + + +* Major changes in Chopstx 0.07 + Released 2015-07-15 ** New Board macro definitions diff --git a/board/board-st-nucleo-f103.h b/board/board-st-nucleo-f103.h new file mode 100644 index 0000000..9bb2cc0 --- /dev/null +++ b/board/board-st-nucleo-f103.h @@ -0,0 +1,45 @@ +#define BOARD_NAME "ST Nucleo F103" +#define BOARD_ID 0x9b87c16d + +/* + * Please add X3 and USB cable to ST Nucleo F103. + * + * Solder X3 XTAL of 8MHz (and put C33 and C34 of 22pF). + * Solder the bridges for R35 and R37, since it's 0 ohm. + * + * (Optional) Remove SB54 and SB55. + * + * At CN10, connect USB cable + * Vbus RED --> 10 NC ----------> CN7 (6 E5V) + * D+ GREEN --> 12 PA11 ---[1K5]--> CN6 (4 3V3) + * D- WHITE --> 14 PA12 + * GND BLACK --> 20 GND + */ + +#define STM32F10X_MD /* Medium-density device */ + +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HSECLK 8000000 + +#define GPIO_LED_BASE GPIOA_BASE +#define GPIO_LED_SET_TO_EMIT 5 +#undef GPIO_USB_BASE /* No external DISCONNECT/RENUM circuit. */ +#undef GPIO_OTHER_BASE + +/* + * Port A setup. + * PA0 - input with pull-up. AN0 + * PA1 - input with pull-up. AN1 + * PA5 - Push pull output 50MHz (LED 1:ON 0:OFF) + * PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) + * PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) + * ------------------------ Default + * PAx - input with pull-up + */ +#define VAL_GPIO_LED_ODR 0xFFFFE7FF +#define VAL_GPIO_LED_CRL 0x88388888 /* PA7...PA0 */ +#define VAL_GPIO_LED_CRH 0x88811888 /* PA15...PA8 */ + +#define RCC_ENR_IOP_EN RCC_APB2ENR_IOPAEN +#define RCC_RSTR_IOP_RST RCC_APB2RSTR_IOPARST |