| Age | Commit message (Collapse) | Author |
|---|
|
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
The Kendryte K210 follows RISC-V v1.9 spec so MTVAL has instruction
address (instead of instruction encoding) on illegal instruction trap.
To handle above case, we fix sbi_illegal_insn_handler() without any
impact on RISC-V v1.10 (or higher) systems. This achieved by exploiting
the fact that program counter (and instruction address) is always 2-byte
aligned in RISC-V world.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
To support RISC-V hypervisor v0.6.1, we:
1. Don't need to explicitly forward WFI traps from VS/VU-mode
2. Have to delegate virtual instruction trap to HS-mode
3. Have to update trap redirection for changes in HSTATUS CSR
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We remove mcause, scratch and hartid parameters from various
functions for illegal instruction handling because we can always
get current HART id and current scratch pointer using just one
CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We remove scratch and hartid parameter from various functions
for CSR emulation because we can always get current HART id
and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The scratch parameter of sbi_trap_redirect() is not used hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The scratch parameter of unpriv load/store functions is now redundant
hence we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The right location for all bits related defines and macros is
sbi_bitops.h hence this patch. With this patch, the sbi_bits.h
is redundant so we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The hypervisor v0.5 spec introduces two new CSRs for both M-mode
and HS-mode which need to be considered when redirecting traps
hence this patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
The unpriv APIs can be useful to external firmware and out-of-tree
platform support code.
This patch adds "sbi_" prefix to unpriv load/store APIs and rename
struct riscv_unpriv to struct sbi_trap_info everywhere. We also
place struct sbi_trap_info in sbi/sbi_trap.h so that we can use
it for sbi_trap_redirect() as well.
Overall, this patch will make naming of unpriv APIs consistent
with other OpenSBI APIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We don't need to set VSSTATUS.MXR bit in get_insn() for
unpriv instruction read because MSTATUS.MXR bit applies
to both "Stage1" and "Stage2" page tables.
This also allows us to remove the "virt" parameter of
get_insn() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
For platforms not having TIME CSR, we trap-n-emulate TIME CSR
read/write in OpenSBI. Same rationale applies to HTIMEDELTA CSR
as well so we trap-n-emulate HTIMEDELTA CSR for platforms not
having TIME CSR.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Current implementation of get_insn() is not suitable for reading
instruction from VS/VU mode because we have to set SSTATUS_MXR bit
in VSSTATUS CSR for reading instruction from VS/VU mode.
This patch extends get_insn() to read instruction from VS/VU mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The WFI will trap as illegal instruction trap when executed
in VS/VU mode so we just forward/redirect it to HS-mode so
that hypervisor can deal with it appropriately.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
We can get a page/access trap when doing unpriv load/store in
get_insn() function because on a SMP system Linux swapper running
on HART A can unmap pages from page table used by HART B.
To tackle this we extend get_insn() implementation so that if
we get trap in get_insn() then we redirect it to S-mode as fetch
page/access fault.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
