blob: d81675d804b13fbb4110057d29cc1392421f7095 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
#define BOARD_NAME "NITROKEY-START"
#define BOARD_ID 0xad1e7ebd
#define STM32F10X_MD /* Medium-density device */
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 6
#define STM32_HSECLK 12000000
#define GPIO_LED_BASE GPIOB_BASE
#define GPIO_LED_SET_TO_EMIT 0
#define GPIO_USB_BASE GPIOA_BASE
#define GPIO_USB_SET_TO_ENABLE 15
#undef GPIO_OTHER_BASE
/*
* Port A setup.
* PA0 - input with pull-up: AN0 for NeuG
* PA1 - input with pull-up: AN1 for NeuG
* PA2 - floating input
* PA3 - floating input
* PA4 - floating input
* PA5 - floating input
* PA6 - floating input
* PA7 - Push pull output (Red LED1 1:ON 0:OFF)
* PA8 - floating input (smartcard, SCDSA)
* PA9 - floating input
* PA10 - floating input
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* PA15 - Push pull output (USB_EN 1:ON 0:OFF)
* ------------------------ Default
* PA8 - input with pull-up.
* PA9 - floating input.
* PA10 - floating input.
* PA13 - input with pull-up.
* PA14 - input with pull-up.
* PA15 - Push pull output (USB 1:ON 0:OFF)
*/
#define VAL_GPIO_USB_ODR 0xFFFFE77F
#define VAL_GPIO_USB_CRL 0x34444488 /* PA7...PA0 */
#define VAL_GPIO_USB_CRH 0x38811444 /* PA15...PA8 */
/*
* Port B setup.
* PB0 - Push pull output (Green LED2 1:ON 0:OFF)
* ------------------------ Default
* PBx - input with pull-up.
*/
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
#define VAL_GPIO_LED_CRL 0x88888883 /* PA7...PA0 */
#define VAL_GPIO_LED_CRH 0x88888888 /* PA15...PA8 */
#define RCC_ENR_IOP_EN \
(RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_AFIOEN)
#define RCC_RSTR_IOP_RST \
(RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | RCC_APB2RSTR_AFIORST)
#define AFIO_MAPR_SOMETHING AFIO_MAPR_SWJ_CFG_JTAGDISABLE
|
