blob: 5f617f6ce3b9f5fea0f6195597aaead9d2b3c33d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
|
#define BOARD_NAME "Maple Mini"
#define BOARD_ID 0x7a445272
#define STM32F10X_MD /* Medium-density device */
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HSECLK 8000000
#define GPIO_LED_BASE GPIOB_BASE
#define GPIO_LED_SET_TO_EMIT 1
#define GPIO_USB_BASE GPIOB_BASE
#define GPIO_USB_CLEAR_TO_ENABLE 9
#define GPIO_OTHER_BASE GPIOA_BASE
/*
* Port A setup.
* PA0 - input with pull-up. AN0
* PA1 - input with pull-up. AN1
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PAx - input with pull-up
*/
#define VAL_GPIO_OTHER_ODR 0xFFFFE7FF
#define VAL_GPIO_OTHER_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */
/*
* Port B setup.
* PB1 - Push pull output 50MHz (LED 1:ON 0:OFF)
* PB9 - Push pull output 50MHz (USB 1:ON 0:OFF)
* ------------------------ Default
* PBx - input with pull-up
*/
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
#define VAL_GPIO_LED_CRL 0x88888838 /* PB7...PB0 */
#define VAL_GPIO_LED_CRH 0x88888838 /* PB15...PB8 */
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN)
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST)
|
