1 files changed, 0 insertions, 421 deletions
diff --git a/example-led/sys.c b/example-led/sys.c
deleted file mode 100644
index 061f186..0000000
--- a/example-led/sys.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * sys.c - system routines for the initial page for STM32F030 / STM32F103.
- *
- * Copyright (C) 2013, 2014, 2015, 2016 Flying Stone Technology
- * Author: NIIBE Yutaka <gniibe@fsij.org>
- *
- * Copying and distribution of this file, with or without modification,
- * are permitted in any medium without royalty provided the copyright
- * notice and this notice are preserved.  This file is offered as-is,
- * without any warranty.
- *
- * When the flash ROM is protected, we cannot modify the initial page.
- * We put some system routines (which is useful for any program) here.
- */
-
-#include <stdint.h>
-#include <stdlib.h>
-#include "board.h"
-
-#include "mcu/clk_gpio_init-stm32.c"
-
-
-static void
-usb_cable_config (int enable)
-{
-#if defined(GPIO_USB_SET_TO_ENABLE)
-  if (enable)
-    GPIO_USB->BSRR = (1 << GPIO_USB_SET_TO_ENABLE);
-  else
-    GPIO_USB->BRR = (1 << GPIO_USB_SET_TO_ENABLE);
-#elif defined(GPIO_USB_CLEAR_TO_ENABLE)
-  if (enable)
-    GPIO_USB->BRR = (1 << GPIO_USB_CLEAR_TO_ENABLE);
-  else
-    GPIO_USB->BSRR = (1 << GPIO_USB_CLEAR_TO_ENABLE);
-#else
-  (void)enable;
-#endif
-}
-
-void
-set_led (int on)
-{
-#if defined(GPIO_LED_CLEAR_TO_EMIT)
-  if (on)
-    GPIO_LED->BRR = (1 << GPIO_LED_CLEAR_TO_EMIT);
-  else
-    GPIO_LED->BSRR = (1 << GPIO_LED_CLEAR_TO_EMIT);
-#else
-  if (on)
-    GPIO_LED->BSRR = (1 << GPIO_LED_SET_TO_EMIT);
-  else
-    GPIO_LED->BRR = (1 << GPIO_LED_SET_TO_EMIT);
-#endif
-}
-
-static void wait (int count)
-{
-  int i;
-
-  for (i = 0; i < count; i++)
-    asm volatile ("" : : "r" (i) : "memory");
-}
-
-
-static void
-usb_lld_sys_shutdown (void)
-{
-  RCC->APB1ENR &= ~RCC_APB1ENR_USBEN;
-  RCC->APB1RSTR = RCC_APB1RSTR_USBRST;
-  usb_cable_config (0);
-}
-
-static void
-usb_lld_sys_init (void)
-{
-  if ((RCC->APB1ENR & RCC_APB1ENR_USBEN)
-      && (RCC->APB1RSTR & RCC_APB1RSTR_USBRST) == 0)
-    /* Make sure the device is disconnected, even after core reset.  */
-    {
-      usb_lld_sys_shutdown ();
-      /* Disconnect requires SE0 (>= 2.5uS).  */
-      wait (300);
-    }
-
-  usb_cable_config (1);
-  RCC->APB1ENR |= RCC_APB1ENR_USBEN;
-  RCC->APB1RSTR = RCC_APB1RSTR_USBRST;
-  RCC->APB1RSTR = 0;
-}
-
-#define FLASH_KEY1               0x45670123UL
-#define FLASH_KEY2               0xCDEF89ABUL
-
-enum flash_status
-{
-  FLASH_BUSY = 1,
-  FLASH_ERROR_PG,
-  FLASH_ERROR_WRP,
-  FLASH_COMPLETE,
-  FLASH_TIMEOUT
-};
-
-static void __attribute__ ((used))
-flash_unlock (void)
-{
-  FLASH->KEYR = FLASH_KEY1;
-  FLASH->KEYR = FLASH_KEY2;
-}
-
-
-#define intr_disable()  asm volatile ("cpsid   i" : : : "memory")
-#define intr_enable()  asm volatile ("cpsie   i" : : : "memory")
-
-#define FLASH_SR_BSY		0x01
-#define FLASH_SR_PGERR		0x04
-#define FLASH_SR_WRPRTERR	0x10
-#define FLASH_SR_EOP		0x20
-
-#define FLASH_CR_PG	0x0001
-#define FLASH_CR_PER	0x0002
-#define FLASH_CR_MER	0x0004
-#define FLASH_CR_OPTPG	0x0010
-#define FLASH_CR_OPTER	0x0020
-#define FLASH_CR_STRT	0x0040
-#define FLASH_CR_LOCK	0x0080
-#define FLASH_CR_OPTWRE	0x0200
-#define FLASH_CR_ERRIE	0x0400
-#define FLASH_CR_EOPIE	0x1000
-
-static int
-flash_wait_for_last_operation (uint32_t timeout)
-{
-  int status;
-
-  do
-    {
-      status = FLASH->SR;
-      if (--timeout == 0)
-	break;
-    }
-  while ((status & FLASH_SR_BSY) != 0);
-
-  return status & (FLASH_SR_BSY|FLASH_SR_PGERR|FLASH_SR_WRPRTERR);
-}
-
-#define FLASH_PROGRAM_TIMEOUT 0x00010000
-#define FLASH_ERASE_TIMEOUT   0x01000000
-
-static int
-flash_program_halfword (uint32_t addr, uint16_t data)
-{
-  int status;
-
-  status = flash_wait_for_last_operation (FLASH_PROGRAM_TIMEOUT);
-
-  intr_disable ();
-  if (status == 0)
-    {
-      FLASH->CR |= FLASH_CR_PG;
-
-      *(volatile uint16_t *)addr = data;
-
-      status = flash_wait_for_last_operation (FLASH_PROGRAM_TIMEOUT);
-      FLASH->CR &= ~FLASH_CR_PG;
-    }
-  intr_enable ();
-
-  return status;
-}
-
-static int
-flash_erase_page (uint32_t addr)
-{
-  int status;
-
-  status = flash_wait_for_last_operation (FLASH_ERASE_TIMEOUT);
-
-  intr_disable ();
-  if (status == 0)
-    {
-      FLASH->CR |= FLASH_CR_PER;
-      FLASH->AR = addr;
-      FLASH->CR |= FLASH_CR_STRT;
-
-      status = flash_wait_for_last_operation (FLASH_ERASE_TIMEOUT);
-      FLASH->CR &= ~FLASH_CR_PER;
-    }
-  intr_enable ();
-
-  return status;
-}
-
-static int
-flash_check_blank (const uint8_t *p_start, size_t size)
-{
-  const uint8_t *p;
-
-  for (p = p_start; p < p_start + size; p++)
-    if (*p != 0xff)
-      return 0;
-
-  return 1;
-}
-
-#define FLASH_START_ADDR 0x08000000 /* Fixed for all STM32F0/F1.  */
-#define FLASH_OFFSET     0x1000     /* First pages are not-writable
-				       when protected.  */
-#if defined(__ARM_ARCH_6M__)
-#define FLASH_SIZE_REG   ((uint16_t *)0x1ffff7cc)
-#define CHIP_ID_REG      ((uint32_t *)0x40015800)
-#else
-#define FLASH_SIZE_REG   ((uint16_t *)0x1ffff7e0)
-#define CHIP_ID_REG      ((uint32_t *)0xe0042000)
-#endif
-#define FLASH_START      (FLASH_START_ADDR+FLASH_OFFSET)
-
-static int
-flash_write (uint32_t dst_addr, const uint8_t *src, size_t len)
-{
-  int status;
-  uint32_t flash_end = FLASH_START_ADDR + (*FLASH_SIZE_REG)*1024;
-
-  if (dst_addr < FLASH_START || dst_addr + len > flash_end)
-    return 0;
-
-  while (len)
-    {
-      uint16_t hw = *src++;
-
-      hw |= (*src++ << 8);
-      status = flash_program_halfword (dst_addr, hw);
-      if (status != 0)
-	return 0;		/* error return */
-
-      dst_addr += 2;
-      len -= 2;
-    }
-
-  return 1;
-}
-
-#define OPTION_BYTES_ADDR 0x1ffff800
-
-static int
-flash_protect (void)
-{
-  int status;
-  uint32_t option_bytes_value;
-
-  status = flash_wait_for_last_operation (FLASH_ERASE_TIMEOUT);
-
-  intr_disable ();
-  if (status == 0)
-    {
-      FLASH->OPTKEYR = FLASH_KEY1;
-      FLASH->OPTKEYR = FLASH_KEY2;
-
-      FLASH->CR |= FLASH_CR_OPTER;
-      FLASH->CR |= FLASH_CR_STRT;
-
-      status = flash_wait_for_last_operation (FLASH_ERASE_TIMEOUT);
-      FLASH->CR &= ~FLASH_CR_OPTER;
-    }
-  intr_enable ();
-
-  if (status != 0)
-    return 0;
-
-  option_bytes_value = *(uint32_t *)OPTION_BYTES_ADDR;
-  return (option_bytes_value & 0xff) == 0xff ? 1 : 0;
-}
-
-static void __attribute__((naked))
-flash_erase_all_and_exec (void (*entry)(void))
-{
-  uint32_t addr = FLASH_START;
-  uint32_t end = FLASH_START_ADDR + (*FLASH_SIZE_REG)*1024;
-  uint32_t page_size = 1024;
-  int r;
-
-  if (((*CHIP_ID_REG) & 0xfff) == 0x0414)
-    page_size = 2048;
-
-  while (addr < end)
-    {
-      r = flash_erase_page (addr);
-      if (r != 0)
-	break;
-
-      addr += page_size;
-    }
-
-  if (addr >= end)
-    (*entry) ();
-
-  for (;;);
-}
-
-struct SCB
-{
-  volatile uint32_t CPUID;
-  volatile uint32_t ICSR;
-  volatile uint32_t VTOR;
-  volatile uint32_t AIRCR;
-  volatile uint32_t SCR;
-  volatile uint32_t CCR;
-  volatile uint8_t  SHP[12];
-  volatile uint32_t SHCSR;
-  volatile uint32_t CFSR;
-  volatile uint32_t HFSR;
-  volatile uint32_t DFSR;
-  volatile uint32_t MMFAR;
-  volatile uint32_t BFAR;
-  volatile uint32_t AFSR;
-  volatile uint32_t PFR[2];
-  volatile uint32_t DFR;
-  volatile uint32_t ADR;
-  volatile uint32_t MMFR[4];
-  volatile uint32_t ISAR[5];
-};
-
-#define SCS_BASE	(0xE000E000)
-#define SCB_BASE	(SCS_BASE +  0x0D00)
-static struct SCB *const SCB = ((struct SCB *const) SCB_BASE);
-
-#define SYSRESETREQ 0x04
-static void
-nvic_system_reset (void)
-{
-  SCB->AIRCR = (0x05FA0000 | (SCB->AIRCR & 0x70) | SYSRESETREQ);
-  asm volatile ("dsb");
-  for (;;);
-}
-
-static void __attribute__ ((naked))
-reset (void)
-{
-  /*
-   * This code may not be at the start of flash ROM, because of DFU.
-   * So, we take the address from PC.
-   */
-#if defined(__ARM_ARCH_6M__)
-  asm volatile ("cpsid	i\n\t"		/* Mask all interrupts. */
-		"ldr	r0, 1f\n\t"     /* r0 = RAM start */
-		"mov	r1, pc\n\t"	/* r1 = (PC + 0x1000) & ~0x0fff */
-		"mov	r2, #0x10\n\t"
-		"lsl	r2, #8\n\t"
-		"add	r1, r1, r2\n\t"
-		"sub	r2, r2, #1\n\t"
-		"bic	r1, r1, r2\n\t"
-		"mov	r2, #188\n"
-	"2:\n\t" /* Copy vectors.  It will be enabled later by clock_init.  */
-		"ldr	r3, [r1, r2]\n\t"
-		"str	r3, [r0, r2]\n\t"
-		"sub	r2, #4\n\t"
-		"bcs	2b\n\t"
-		"msr	MSP, r3\n\t"	/* Main (exception handler) stack. */
-		"ldr	r0, [r1, #4]\n\t" /* Reset handler.                */
-		"bx	r0\n\t"
-		".align	2\n"
-	"1:	.word	0x20000000"
-		: /* no output */ : /* no input */ : "memory");
-#else
-  extern const unsigned long *FT0, *FT1, *FT2;
-  asm volatile ("cpsid	i\n\t"		/* Mask all interrupts. */
-		"ldr	r0, 1f\n\t"     /* r0 = SCR */
-		"mov	r1, pc\n\t"	/* r1 = (PC + 0x1000) & ~0x0fff */
-		"mov	r2, #0x1000\n\t"
-		"add	r1, r1, r2\n\t"
-		"sub	r2, r2, #1\n\t"
-		"bic	r1, r1, r2\n\t"
-		"str	r1, [r0, #8]\n\t"	/* Set SCR->VCR */
-		"ldr	r0, [r1], #4\n\t"
-		"msr	MSP, r0\n\t"	/* Main (exception handler) stack. */
-		"ldr	r0, [r1]\n\t"	/* Reset handler.                  */
-		"bx	r0\n\t"
-		".align	2\n"
-	"1:	.word	0xe000ed00"
-		: /* no output */ : /* no input */ : "memory");
-  /* Artificial entry to refer FT0, FT1, and FT2.  */
-  asm volatile (""
-		: : "r" (FT0), "r" (FT1), "r" (FT2));
-#endif
-  /* Never reach here. */
-}
-
-typedef void (*handler)(void);
-extern uint8_t __ram_end__;
-
-handler vector[] __attribute__ ((section(".vectors"))) = {
-  (handler)&__ram_end__,
-  reset,
-  (handler)set_led,
-  flash_unlock,
-  (handler)flash_program_halfword,
-  (handler)flash_erase_page,
-  (handler)flash_check_blank,
-  (handler)flash_write,
-  (handler)flash_protect,
-  (handler)flash_erase_all_and_exec,
-  usb_lld_sys_init,
-  usb_lld_sys_shutdown,
-  nvic_system_reset,
-  clock_init,
-  gpio_init,
-  NULL,
-};
-
-const uint8_t sys_version[8] __attribute__((section(".sys.version"))) = {
-  3*2+2,	     /* bLength */
-  0x03,		     /* bDescriptorType = USB_STRING_DESCRIPTOR_TYPE */
-  /* sys version: "3.0" */
-  '3', 0, '.', 0, '0', 0,
-};
-
-const uint32_t __attribute__((section(".sys.board_id")))
-sys_board_id = BOARD_ID;
-
-const uint8_t __attribute__((section(".sys.board_name")))
-sys_board_name[] = BOARD_NAME;