diff options
| author | NIIBE Yutaka <gniibe@fsij.org> | 2015-07-07 12:31:15 +0900 |
|---|---|---|
| committer | NIIBE Yutaka <gniibe@fsij.org> | 2015-07-07 12:31:15 +0900 |
| commit | 4dc10d6b18730cb59c3ea25d435377c4adc2d549 (patch) | |
| tree | 9e33786113b9de82e1df0b6f1841a328930fb36e /example-fsm-55 | |
| parent | 43bd3bcefd6dbd28e3fd68ca8ff6b9a877009774 (diff) | |
Update for FSM-55
Diffstat (limited to 'example-fsm-55')
| l--------- | example-fsm-55/hacker-emblem.c | 2 | ||||
| -rw-r--r-- | example-fsm-55/sys.c | 332 |
2 files changed, 3 insertions, 331 deletions
diff --git a/example-fsm-55/hacker-emblem.c b/example-fsm-55/hacker-emblem.c index d2bfd5f..1146f45 120000 --- a/example-fsm-55/hacker-emblem.c +++ b/example-fsm-55/hacker-emblem.c @@ -1 +1 @@ -debian-logo.c
\ No newline at end of file +hh.c
\ No newline at end of file diff --git a/example-fsm-55/sys.c b/example-fsm-55/sys.c index 3171376..cd367d8 100644 --- a/example-fsm-55/sys.c +++ b/example-fsm-55/sys.c @@ -1,7 +1,7 @@ /* * sys.c - system routines for the initial page for STM32F030 / STM32F103. * - * Copyright (C) 2013, 2014 Flying Stone Technology + * Copyright (C) 2013, 2014, 2015 Flying Stone Technology * Author: NIIBE Yutaka <gniibe@fsij.org> * * Copying and distribution of this file, with or without modification, @@ -17,59 +17,13 @@ #include <stdlib.h> #include "board.h" +#include "clk_gpio_init.c" #define CORTEX_PRIORITY_BITS 4 #define CORTEX_PRIORITY_MASK(n) ((n) << (8 - CORTEX_PRIORITY_BITS)) #define USB_LP_CAN1_RX0_IRQn 20 #define STM32_USB_IRQ_PRIORITY 11 -#define STM32_SW_HSI (0 << 0) -#define STM32_SW_PLL (2 << 0) -#define STM32_PLLSRC_HSI (0 << 16) -#define STM32_PLLSRC_HSE (1 << 16) - -#define STM32_PLLXTPRE_DIV1 (0 << 17) -#define STM32_PLLXTPRE_DIV2 (1 << 17) - -#define STM32_HPRE_DIV1 (0 << 4) - -#define STM32_PPRE1_DIV1 (0 << 8) -#define STM32_PPRE1_DIV2 (4 << 8) - -#define STM32_PPRE2_DIV1 (0 << 11) -#define STM32_PPRE2_DIV2 (4 << 11) - -#define STM32_ADCPRE_DIV4 (1 << 14) -#define STM32_ADCPRE_DIV6 (2 << 14) - -#define STM32_USBPRE_DIV1P5 (0 << 22) - -#define STM32_MCO_NOCLOCK (0 << 24) - -#if MCU_STM32F0 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_FLASHBITS 0x00000011 -#define STM32_PLLCLKIN (STM32_HSICLK / 2) -#else -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_FLASHBITS 0x00000012 -#define STM32_PLLCLKIN (STM32_HSECLK / 1) -#endif - -#define STM32_SW STM32_SW_PLL -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_ADCPRE STM32_ADCPRE_DIV6 -#define STM32_MCOSEL STM32_MCO_NOCLOCK -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -#define STM32_PLLMUL ((STM32_PLLMUL_VALUE - 2) << 18) -#define STM32_PLLCLKOUT (STM32_PLLCLKIN * STM32_PLLMUL_VALUE) -#define STM32_SYSCLK STM32_PLLCLKOUT -#define STM32_HCLK (STM32_SYSCLK / 1) - struct NVIC { uint32_t ISER[8]; uint32_t unused1[24]; @@ -99,288 +53,6 @@ nvic_enable_vector (uint32_t n, uint32_t prio) NVIC_ISER (n) = 1 << (n & 0x1F); } - -#define PERIPH_BASE 0x40000000 -#define APBPERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) -#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000) - -struct RCC { - volatile uint32_t CR; - volatile uint32_t CFGR; - volatile uint32_t CIR; - volatile uint32_t APB2RSTR; - volatile uint32_t APB1RSTR; - volatile uint32_t AHBENR; - volatile uint32_t APB2ENR; - volatile uint32_t APB1ENR; - volatile uint32_t BDCR; - volatile uint32_t CSR; -#if MCU_STM32F0 - volatile uint32_t AHBRSTR; - volatile uint32_t CFGR2; - volatile uint32_t CFGR3; - volatile uint32_t CR2; -#endif -}; - -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -static struct RCC *const RCC = ((struct RCC *const)RCC_BASE); - -#define RCC_APB1ENR_USBEN 0x00800000 -#define RCC_APB1RSTR_USBRST 0x00800000 - -#define RCC_CR_HSION 0x00000001 -#define RCC_CR_HSIRDY 0x00000002 -#define RCC_CR_HSITRIM 0x000000F8 -#define RCC_CR_HSEON 0x00010000 -#define RCC_CR_HSERDY 0x00020000 -#define RCC_CR_PLLON 0x01000000 -#define RCC_CR_PLLRDY 0x02000000 - -#define RCC_CFGR_SWS 0x0000000C -#define RCC_CFGR_SWS_HSI 0x00000000 - -#define RCC_AHBENR_CRCEN 0x0040 - -#if MCU_STM32F0 -#define RCC_AHBRSTR_IOPARST 0x00020000 -#define RCC_AHBRSTR_IOPBRST 0x00040000 -#define RCC_AHBRSTR_IOPCRST 0x00080000 -#define RCC_AHBRSTR_IOPDRST 0x00100000 -#define RCC_AHBRSTR_IOPFRST 0x00400000 - -#define RCC_AHBENR_IOPAEN 0x00020000 -#define RCC_AHBENR_IOPBEN 0x00040000 -#define RCC_AHBENR_IOPCEN 0x00080000 -#define RCC_AHBENR_IOPDEN 0x00100000 -#define RCC_AHBENR_IOPFEN 0x00400000 - -#define RCC_APB2RSTR_SYSCFGRST 0x00000001 -#define RCC_APB2ENR_SYSCFGEN 0x00000001 -#else -#define RCC_APB2RSTR_AFIORST 0x00000001 -#define RCC_APB2RSTR_IOPARST 0x00000004 -#define RCC_APB2RSTR_IOPBRST 0x00000008 -#define RCC_APB2RSTR_IOPCRST 0x00000010 -#define RCC_APB2RSTR_IOPDRST 0x00000020 - -#define RCC_APB2ENR_AFIOEN 0x00000001 -#define RCC_APB2ENR_IOPAEN 0x00000004 -#define RCC_APB2ENR_IOPBEN 0x00000008 -#define RCC_APB2ENR_IOPCEN 0x00000010 -#define RCC_APB2ENR_IOPDEN 0x00000020 -#endif - -#if MCU_STM32F0 -struct SYSCFG { - volatile uint32_t CFGR1; - uint32_t dummy0; - volatile uint32_t EXTICR[4]; - volatile uint32_t CFGR2; -}; -#define SYSCFG_CFGR1_MEM_MODE 0x03 - -#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000) -static struct SYSCFG *const SYSCFG = ((struct SYSCFG *const) SYSCFG_BASE); -#endif - -struct FLASH { - volatile uint32_t ACR; - volatile uint32_t KEYR; - volatile uint32_t OPTKEYR; - volatile uint32_t SR; - volatile uint32_t CR; - volatile uint32_t AR; - volatile uint32_t RESERVED; - volatile uint32_t OBR; - volatile uint32_t WRPR; -}; - -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) -static struct FLASH *const FLASH = ((struct FLASH *const) FLASH_R_BASE); - -static void -clock_init (void) -{ - /* HSI setup */ - RCC->CR |= RCC_CR_HSION; - while (!(RCC->CR & RCC_CR_HSIRDY)) - ; - /* Reset HSEON, HSEBYP, CSSON, and PLLON, not touching RCC_CR_HSITRIM */ - RCC->CR &= (RCC_CR_HSITRIM | RCC_CR_HSION); - RCC->CFGR = 0; - while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI) - ; - -#if !MCU_STM32F0 - /* HSE setup */ - RCC->CR |= RCC_CR_HSEON; - while (!(RCC->CR & RCC_CR_HSERDY)) - ; -#endif - - /* PLL setup */ - RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC; - RCC->CR |= RCC_CR_PLLON; - while (!(RCC->CR & RCC_CR_PLLRDY)) - ; - - /* Clock settings */ - RCC->CFGR = STM32_MCOSEL | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE - | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE; - - /* Switching on the configured clock source. */ - RCC->CFGR |= STM32_SW; - while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2)) - ; - - /* - * We don't touch RCC->CR2, RCC->CFGR2, RCC->CFGR3, and RCC->CIR. - */ - - /* Flash setup */ - FLASH->ACR = STM32_FLASHBITS; - - /* CRC */ - RCC->AHBENR |= RCC_AHBENR_CRCEN; - -#if MCU_STM32F0 - RCC->APB2ENR |= RCC_APB2ENR_SYSCFGEN; - RCC->APB2RSTR = RCC_APB2RSTR_SYSCFGRST; - RCC->APB2RSTR = 0; - - /* Use vectors on RAM */ - SYSCFG->CFGR1 = (SYSCFG->CFGR1 & ~SYSCFG_CFGR1_MEM_MODE) | 3; -#endif -} - - -#if MCU_STM32F0 -struct GPIO { - volatile uint32_t MODER; - volatile uint16_t OTYPER; - uint16_t dummy0; - volatile uint32_t OSPEEDR; - volatile uint32_t PUPDR; - volatile uint16_t IDR; - uint16_t dummy1; - volatile uint16_t ODR; - uint16_t dummy2; - volatile uint16_t BSRR; - uint16_t dummy3; - volatile uint32_t LCKR; - volatile uint32_t AFR[2]; - volatile uint16_t BRR; - uint16_t dummy4; -}; - -#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000) -#define GPIOA ((struct GPIO *) GPIOA_BASE) -#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400) -#define GPIOB ((struct GPIO *) GPIOB_BASE) -#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800) -#define GPIOC ((struct GPIO *) GPIOC_BASE) -#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00) -#define GPIOD ((struct GPIO *) GPIOD_BASE) -#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400) -#define GPIOF ((struct GPIO *) GPIOF_BASE) -#else -struct AFIO -{ - volatile uint32_t EVCR; - volatile uint32_t MAPR; - volatile uint32_t EXTICR[4]; - uint32_t RESERVED0; - volatile uint32_t MAPR2; -}; - -#define AFIO_BASE 0x40010000 -static struct AFIO *const AFIO = (struct AFIO *const)AFIO_BASE; - -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP 0x00000800 -#define AFIO_MAPR_SWJ_CFG_DISABLE 0x04000000 - -struct GPIO { - volatile uint32_t CRL; - volatile uint32_t CRH; - volatile uint32_t IDR; - volatile uint32_t ODR; - volatile uint32_t BSRR; - volatile uint32_t BRR; - volatile uint32_t LCKR; -}; - -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOA ((struct GPIO *) GPIOA_BASE) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOB ((struct GPIO *) GPIOB_BASE) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOC ((struct GPIO *) GPIOC_BASE) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOD ((struct GPIO *) GPIOD_BASE) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOE ((struct GPIO *) GPIOE_BASE) -#endif - -static struct GPIO *const GPIO_LED = ((struct GPIO *const) GPIO_LED_BASE); -#ifdef GPIO_USB_BASE -static struct GPIO *const GPIO_USB = ((struct GPIO *const) GPIO_USB_BASE); -#endif -#ifdef GPIO_OTHER_BASE -static struct GPIO *const GPIO_OTHER = ((struct GPIO *const) GPIO_OTHER_BASE); -#endif - -static void -gpio_init (void) -{ - /* Enable GPIO clock. */ -#if MCU_STM32F0 - RCC->AHBENR |= RCC_ENR_IOP_EN; - RCC->AHBRSTR = RCC_RSTR_IOP_RST; - RCC->AHBRSTR = 0; -#else - RCC->APB2ENR |= RCC_ENR_IOP_EN; - RCC->APB2RSTR = RCC_RSTR_IOP_RST; - RCC->APB2RSTR = 0; -#endif - -#if MCU_STM32F0 - GPIO_LED->OSPEEDR = VAL_GPIO_OSPEEDR; - GPIO_LED->OTYPER = VAL_GPIO_OTYPER; - GPIO_LED->MODER = VAL_GPIO_MODER; - GPIO_LED->PUPDR = VAL_GPIO_PUPDR; - -#ifdef GPIO_OTHER_BASE - GPIO_OTHER->OSPEEDR = VAL_GPIO_OTHER_OSPEEDR; - GPIO_OTHER->OTYPER = VAL_GPIO_OTHER_OTYPER; - GPIO_OTHER->MODER = VAL_GPIO_OTHER_MODER; - GPIO_OTHER->PUPDR = VAL_GPIO_OTHER_PUPDR; -#endif -#else -#ifdef AFIO_MAPR_SOMETHING - AFIO->MAPR |= AFIO_MAPR_SOMETHING; -#endif - - GPIO_USB->ODR = VAL_GPIO_ODR; - GPIO_USB->CRH = VAL_GPIO_CRH; - GPIO_USB->CRL = VAL_GPIO_CRL; - -#if GPIO_USB_BASE != GPIO_LED_BASE - GPIO_LED->ODR = VAL_GPIO_LED_ODR; - GPIO_LED->CRH = VAL_GPIO_LED_CRH; - GPIO_LED->CRL = VAL_GPIO_LED_CRL; -#endif - -#ifdef GPIO_OTHER_BASE - GPIO_OTHER->ODR = VAL_GPIO_OTHER_ODR; - GPIO_OTHER->CRH = VAL_GPIO_OTHER_CRH; - GPIO_OTHER->CRL = VAL_GPIO_OTHER_CRL; -#endif -#endif -} - static void usb_cable_config (int enable) { |