diff options
| author | Mateusz Zalega <mateusz@nitrokey.com> | 2015-08-07 19:36:31 +0200 |
|---|---|---|
| committer | NIIBE Yutaka <gniibe@fsij.org> | 2015-09-04 16:38:01 +0900 |
| commit | 8650bde8a056ca8d7954837bfd6692958e263634 (patch) | |
| tree | 00e144adedd4a80331774838f94fb97dcd13e355 /board | |
| parent | 6e7334dcfff83898ff6b8568bf24c6fe90deaa9c (diff) | |
board: add Nitrokey Start
Signed-off-by: Mateusz Zalega <mateusz@nitrokey.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/board-nitrokey-start.h | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/board/board-nitrokey-start.h b/board/board-nitrokey-start.h new file mode 100644 index 0000000..4904d9d --- /dev/null +++ b/board/board-nitrokey-start.h @@ -0,0 +1,61 @@ +#define BOARD_NAME "NITROKEY-START" +#define BOARD_ID 0x4aa5b5e2 + +#define STM32F10X_MD /* Medium-density device */ + +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 6 +#define STM32_HSECLK 12000000 + +#define GPIO_LED_BASE GPIOB_BASE +#define GPIO_LED_SET_TO_EMIT 0 +#define GPIO_USB_BASE GPIOA_BASE +#define GPIO_USB_SET_TO_ENABLE 15 +#undef GPIO_OTHER_BASE + +/* + * Port A setup. + * PA0 - input with pull-up (TIM2_CH1): AN0 for NeuG + * PA1 - floating input + * PA2 - floating input + * PA3 - floating input + * PA4 - floating input + * PA5 - floating input + * PA6 - floating input + * PA7 - Push pull output (LED1 1:ON 0:OFF) + * PA8 - floating input (smartcard, SCDSA) + * PA9 - floating input + * PA10 - floating input + * PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) + * PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) + * PA15 - Push pull output (USB_EN 1:ON 0:OFF) + * ------------------------ Default + * PA8 - input with pull-up. + * PA9 - floating input. + * PA10 - floating input. + * PA13 - input with pull-up. + * PA14 - input with pull-up. + * PA15 - Push pull output (USB 1:ON 0:OFF) + */ +#define VAL_GPIO_USB_ODR 0xFFFFE7FD +#define VAL_GPIO_USB_CRL 0x34444448 /* PA7...PA0 */ +#define VAL_GPIO_USB_CRH 0x38811444 /* PA15...PA8 */ + +/* + * Port B setup. + * PB0 - Push pull output (LED2 1:ON 0:OFF) + * PB1 - input with pull-up: AN9 for NeuG + * ------------------------ Default + * PBx - input with pull-up. + */ +#define VAL_GPIO_LED_ODR 0xFFFFFFFF +#define VAL_GPIO_LED_CRL 0x88888883 /* PA7...PA0 */ +#define VAL_GPIO_LED_CRH 0x88888888 /* PA15...PA8 */ + +#define RCC_ENR_IOP_EN \ + (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_AFIOEN) +#define RCC_RSTR_IOP_RST \ + (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | RCC_APB2RSTR_AFIORST) + +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) +#define AFIO_MAPR_SOMETHING AFIO_MAPR_SWJ_CFG_JTAGDISABLE |