| Age | Commit message (Collapse) | Author |
|---|
|
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Doxygen does not support italic text in page title so fix
some of the markdown files accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
With QEMU v4.2 RISC-V changes to improve the emulation fidelity
of 'sifive_u' machine, OpenSBI v0.4 / U-Boot v2019.10 / Linux
kernel v5.3 images built for the SiFive HiFive Unleashed board
can be used out of the box without any special hack. Hence there
is no need for us to continue supporting such a special target in
OpenSBI. Going forward, sifive/fu540 platform can be used on both
real hardware and QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
This patch updates FW_JUMP and FW_PAYLOAD documentation for the
case where FW_xyz_FDT_ADDR is not specified.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
- fix some broken hyperlinks
- add additional hyperlinks to references to external documents
- reformat some paragraphs to keep lines under 80 characters
- unify the enumeration style between different parts of the
documentation
- fix spelling/grammar mistakes
- extend the copyright notice in README.md to be the same as the
one in COPYING.BSD
Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
Reformatting, typos, and various corrections.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
Use a more neutral term more representative of this payload intent.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
Add rules to compile dts files into dtb files using the device tree
compiler (dtc). A platform can specify the DTS file to compile using
the platform-dtb-y variable. The flattened device tree binary file to be
used for building the final polatform firmware can be specified using
the new FW_PAYLOAD_FDT firmware configuration option to point to the
automatically compiled FDT file. Using the existing FW_PAYLOAD_FDT_PATH
configuration option is still possible and will take precedence over
the FW_PAYLOAD_FDT definition.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
This patch renames "blob" to "firmware" everywhere for better
and intutive naming.
Signed-off-by: Anup Patel <anup@brainfault.org>
|
