From 6ed2bc154f99d3c067775d8a83bcd42a44838dcf Mon Sep 17 00:00:00 2001
From: Atish Patra <atish.patra@wdc.com>
Date: Thu, 29 Aug 2019 15:19:14 -0700
Subject: docs: Update the fu540 platform guide as per U-Boot documents.
U-Boot readme for fu540 platform suggest that fdt_addr_r should be used
as DT address after DT is copied via tftpboot.
Update the OpenSBI docs to reflect that. Remove other stale informations
as well.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
---
docs/platform/sifive_fu540.md | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
(limited to 'docs')
diff --git a/docs/platform/sifive_fu540.md b/docs/platform/sifive_fu540.md
index 7b0a178..6df904d 100644
--- a/docs/platform/sifive_fu540.md
+++ b/docs/platform/sifive_fu540.md
@@ -47,11 +47,10 @@ make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/bo
The command-line example here assumes that U-Boot was compiled using the
sifive_fu540_defconfig configuration and with U-Boot v2019.04 (or higher)
-having SMP support.
+having SMP support. From, Linux v5.2 (or higher) device tree is hosted in
+Linux kernel and compiled as a part of Linux kernel build process.
-To use U-Boot which follows Linux v5.2 (or higher) DT bindings, we will
-need custom U-Boot with required driver changes which can be found in
-riscv_unleashed_mmc_spi_v2 branch of https://github.com/avpatel/u-boot.git
+The detailed U-Boot booting guide is avaialble at [U-Boot](https://gitlab.denx.de/u-boot/u-boot/blob/master/doc/board/sifive/fu540.rst)
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin
@@ -174,8 +173,11 @@ already part of the kernel or loaded from an external storage by kernel.
```
tftpboot ${ramdisk_addr_r} <ramdisk path in tftpboot directory>
```
-
-7. Set the boot command-line arguments.
+7. Load the pre-compiled device tree via tftpboot.
+```
+tftpboot ${fdt_addr_r} <linux source>/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb
+```
+8. Set the boot command-line arguments.
```
setenv bootargs "root=<root partition> rw console=ttySIF0 earlycon=sbi"
```
@@ -184,12 +186,12 @@ setenv bootargs "root=<root partition> rw console=ttySIF0 earlycon=sbi"
** root=/dev/mmcblk0pX ** - If a rootfs is already on some other partition
of sdcard)
-8. Now boot into Linux.
+9. Now boot into Linux.
```
-bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdtcontroladdr}
+bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
or
(If ramdisk is not loaded from network)
-bootm ${kernel_addr_r} - ${fdtcontroladdr}
+bootm ${kernel_addr_r} - ${fdt_addr_r}
```
**U-Boot & Linux Kernel as a single payload**
@@ -197,5 +199,5 @@ bootm ${kernel_addr_r} - ${fdtcontroladdr}
At U-Boot prompt execute the following boot command to boot Linux.
```
-bootm ${kernel_addr_r} - ${fdtcontroladdr}
+bootm ${kernel_addr_r} - ${fdt_addr_r}
```
--
cgit v1.2.3