| Age | Commit message (Collapse) | Author |
|---|
|
This commit provides basic support for the AE350 platform.
Signed-off-by: Zong Li <zongbox@gmail.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
|
|
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
We should expand the FDT size before any patching, otherwise it's
possible the "status" fix up might fail due to insufficient space.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
There are several places in the source tree that have:
32bit, 32 bit, 64bit, 64 bit
Fix by using the conventional names with a hyphen.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
This patch changes FW_xyz_FDT_ADDR to RAM_START+128MB (i.e. 0x88000000)
so that next stage bootloader (i.e. U-Boot) has enough space to unpack
bigger kernel images.
Reported-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
|
|
Per device tree spec, the standard value string for the "status"
property of a cpu node is either "okay" or "disabled". "masked"
was once used but it is unfortunately a spec violation.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
The Linux kernel will maintain the device tree (DT) for HiFive Unleashed
from release v5.2-rc6. This DT is incompatible with previous DT
present for Microsemi expansion board in OpenSBI.
Since, OpenSBI will directly load the pre-built DTB from kernel now onwards,
no need to keep the out-of-date DT in openSBI. Remove this DT and
it's related documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
This patch adds support for Ariane platform.
We needed to enable PLIC interrupts early(like on BBL) due to some issue of the design.
Otherwise, Linux would not get any external interrupts.
Signed-off-by: Panagiotis Peristerakis <perister@ics.forth.gr>
|
|
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
libsbi needs some of the custom libc functions. It should be directly
included in libsbi instead of platform specific libraries.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
|
|
Since QEMU commit 8b1d0714bfdd
"riscv: sifive_u: Allow up to 4 CPUs to be created",
the maximum number of hart for sifive_u is 4.
Change our hart count to match that.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
This patch enables FW_DYNAMIC option (i.e. dynamic firmware) for
all appropriate/applicable platforms.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Xiang Wang <wxjstz@126.com>
|
|
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add an empty clang-format to disable reformatting of imported code and
make it easier to merge in upstream changes of that project over time.
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch extends our current build-system for building platform
sources which are not part of OpenSBI sources.
For example:
Let's say we have out-of-tree ABC platform sources. We place these
sources under <XYZ>/ABC directory along with its config.mk and
objects.mk.
To build out-of-tree ABC platform from OpenSBI directory:
$ make PLATFORM_DIR=<XYZ>/ABC
OR
$ make PLATFORM_DIR=<XYZ> PLATFORM=ABC
To build out-of-tree ABC platform from <XYZ>/ABC directory:
$ make PLATFORM_DIR=<XYZ>/ABC -C <path_to_opensbi>
OR
$ make PLATFORM_DIR=<XYZ> PLATFORM=ABC -C <path_to_opensbi>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Add missing SPDX and copyright information.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
The codes that currently program the interrupt enable register for
S-mode disagrees with what the comments say. Fix the comments.
While we are here, add one line comment to describe what is done
for M-mode too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Per PLIC spec, interrupt ID 0 is defined to mean "no interrupt".
We should bypass it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
|
|
At present plic_set_priority() ignores the 'source' and the priority
register to be programmed is constant. Fix it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
|
|
There are some spaces or mixed usage of spaces and tabs in the macro
definition. Change to use tab consistently.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
|
|
platform should be a read-only variable, if it is placed in the data
segment, it may be exploited.
Signed-off-by: Xiang Wang <wxjstz@126.com>
|
|
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <xerpi.g.12@gmail.com>
Suggested-by:Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
|
|
|
|
There was a space instead of '_' in the function `platform_final_init`.
|
|
In order for QEMU to be compatible with Spike, it implements
a simple protocol used for reporting back the simulation's
status, through the memory-mapped "test finisher" device. We
use that protocol to make QEMU exit on system shutdown.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
|
|
Add 'make run' command for platform specific run
|
|
Makes for easy and quick build-run one-stop command.
For now only added for qemu targets. It can be added for
any platform having simulator/emulator (such as QEMU).
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Add a device tree for th HiFive Unleashed that includes the Microsemi
PCIe root complex.
Once we have support for u-boot and in tree Linux kernel device trees
this device tree should be removed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
The current 4MB aligned FW_JUMP_ADDR and FW_PAYLOAD_OFFSET breaks
U-Boot on QEMU virt and sifive_u machines.
Instead of using 4MB aligned for both 32bit and 64bit systems, we
use different values based compiler XLEN. Another advantage of this
approach will be that our fw_payload.bin will smaller for 64bit
systems.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Both FW_JUMP_ADDR and FW_PAYLOAD_OFFSET, should be:
1. 4MB aligned for 32bit system
2. 2MB aligned for 64bit system
Explicitly specify the above details in config.mk comments
for template platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
In order to support 32-bit guests move the start address to a 4MB
allignment. As 64-bit kernels have a requirement on being 2MB alligned
let's just make this the default for both 32 and 64 bit kernels.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
In order to support 32-bit guests move the start address to a 4MB
allignment. As 64-bit kernels have a requirement on being 2MB alligned
let's just make this the default for both 32 and 64 bit kernels.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The QEMU virt machine can be either 32 or 66 bit. Don't hard code the
CPU bit length and instead let the compiler determine it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Currently, only hart 1 is enabled for fu540 platform to support U-boot.
Introduce a compile time FU540_ENABLED_HART_MASK option so that specific
harts can be selected for booting. As fu540 is a multicore, we should
boot all cores by default except hart 0.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
Create commented template files to use as a base for new platforms
support implementation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
It is not necessary that platform has MMIO-based timer value
register. It can also have some custom (implementation specific)
CSR for timer value.
This patch renames SBI_PLATFORM_HAS_MMIO_TIMER_VALUE to
SBI_PLATFORM_HAS_TIMER_VALUE to imply "platform timer value"
instead of "mmio timer value".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
