diff options
| author | Minda Chen <minda.chen@starfivetech.com> | 2023-08-25 17:01:29 +0800 |
|---|---|---|
| committer | Aurelien Jarno <aurelien@aurel32.net> | 2023-08-28 07:12:33 +0200 |
| commit | 487f6310f86acc38565bbca62454b70bd8ea9e68 (patch) | |
| tree | 1d34bccbf047dc77f252f2f87b63ffe88cced5c0 | |
| parent | 951d80219e5088d09fd2d5ea8a31356365040ee4 (diff) | |
riscv: dts: starfive: add PCIe dts configuration for JH7110
Add PCIe dts configuraion for JH7110 SoC platform.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230825090129.65721-12-minda.chen@starfivetech.com
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 64 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 |
2 files changed, 150 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index d79f94432b27..7c5378c81906 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -19,6 +19,8 @@ i2c6 = &i2c6; mmc0 = &mmc0; mmc1 = &mmc1; + pcie0 = &pcie0; + pcie1 = &pcie1; serial0 = &uart0; }; @@ -440,6 +442,54 @@ }; }; + pcie0_pins: pcie0-0 { + wake-pins { + pinmux = <GPIOMUX(32, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + clkreq-pins { + pinmux = <GPIOMUX(27, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pcie1_pins: pcie1-0 { + wake-pins { + pinmux = <GPIOMUX(21, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + uart0_pins: uart0-0 { tx-pins { pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, @@ -505,6 +555,20 @@ status = "okay"; }; +&pcie0 { + pinctrl-names = "default"; + perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 9aa563898868..32827122684e 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -1045,5 +1045,91 @@ #reset-cells = <1>; power-domains = <&pwrc JH7110_PD_VOUT>; }; + + pcie0: pcie@940000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0x40000000 0x0 0x1000000>, + <0x0 0x2b000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + interrupts = <56>; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_TL>, + <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE0_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE0_BRG>, + <&stgcrg JH7110_STGRST_PCIE0_CORE>, + <&stgcrg JH7110_STGRST_PCIE0_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie1: pcie@9c0000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0xc0000000 0x0 0x1000000>, + <0x0 0x2c000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; + interrupts = <57>; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_TL>, + <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE1_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE1_BRG>, + <&stgcrg JH7110_STGRST_PCIE1_CORE>, + <&stgcrg JH7110_STGRST_PCIE1_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; }; |