blob: 9e92f666685de6434b782050ed77c85d354b56c4 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
#define FLASH_PAGE_SIZE 1024
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 6
#define STM32_HSECLK 12000000
#define GPIO_USB_SET_TO_ENABLE 14
#define GPIO_LED_CLEAR_TO_EMIT 13
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
#define HAVE_7SEGLED 1
/*
* Timer assignment for CIR
*/
#define TIMx TIM3
#define INTR_REQ_TIM TIM3_IRQ
#define AFIO_EXTICR_INDEX 0
#endif
#if defined(PINPAD_CIR_SUPPORT)
#define AFIO_EXTICR1_EXTIx_Py AFIO_EXTICR1_EXTI0_PB
#define EXTI_PR EXTI_PR_PR0
#define EXTI_IMR EXTI_IMR_MR0
#define EXTI_FTSR_TR EXTI_FTSR_TR0
#define INTR_REQ_EXTI EXTI0_IRQ
#define RCC_APBnENR_TIMxEN RCC_APB1ENR_TIM3EN
#define RCC_APBnRSTR_TIMxRST RCC_APB1RSTR_TIM3RST
#elif defined(PINPAD_DIAL_SUPPORT)
#define AFIO_EXTICR1_EXTIx_Py AFIO_EXTICR1_EXTI2_PB
#define EXTI_PR EXTI_PR_PR2
#define EXTI_IMR EXTI_IMR_MR2
#define EXTI_FTSR_TR EXTI_FTSR_TR2
#define INTR_REQ_EXTI EXTI2_IRQ
#define RCC_APBnENR_TIMxEN RCC_APB1ENR_TIM4EN
#define RCC_APBnRSTR_TIMxRST RCC_APB1RSTR_TIM4RST
#endif
#define ENABLE_RCC_APB1
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
/*
* Port A setup.
* PA1 - Digital input with PullUp. AN1 for NeuG
* PA2 - Digital input with PullUp. AN2 for NeuG
* PA6 - (TIM3_CH1) input with pull-up
* PA7 - (TIM3_CH2) input with pull-down
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* PA13 - Open Drain output (LED1 0:ON 1:OFF)
* PA14 - Push pull output (USB ENABLE 0:DISABLE 1:ENABLE)
* PA15 - Open Drain output (LED2 0:ON 1:OFF)
*/
#define VAL_GPIO_ODR 0xFFFFE77F
#define VAL_GPIO_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_CRH 0x63611888 /* PA15...PA8 */
/*
* Port B setup.
* PB0 - Push pull output (LED 1:ON 0:OFF)
* ------------------------ Default
* PBx - input with pull-up.
*/
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
#define VAL_GPIO_LED_CRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIO_LED_CRH 0x66666666 /* PB15...PB8 */
/* Port B setup. */
#define GPIOB_CIR 0
#define GPIOB_BUTTON 2
#define GPIOB_ROT_A 6
#define GPIOB_ROT_B 7
#define GPIOB_7SEG_DP 15
#define GPIOB_7SEG_A 14
#define GPIOB_7SEG_B 13
#define GPIOB_7SEG_C 12
#define GPIOB_7SEG_D 11
#define GPIOB_7SEG_E 10
#define GPIOB_7SEG_F 9
#define GPIOB_7SEG_G 8
#define RCC_ENR_IOP_EN \
(RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_AFIOEN)
#define RCC_RSTR_IOP_RST \
(RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | RCC_APB2RSTR_AFIORST)
#else
/*
* Port A setup.
* PA1 - Digital input with PullUp. AN1 for NeuG
* PA2 - Digital input with PullUp. AN2 for NeuG
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* PA13 - Open Drain output (LED1 0:ON 1:OFF)
* PA14 - Push pull output (USB ENABLE 0:DISABLE 1:ENABLE)
* PA15 - Open Drain output (LED2 0:ON 1:OFF)
*/
#define VAL_GPIO_ODR 0xFFFFE7FF
#define VAL_GPIO_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_CRH 0x63611888 /* PA15...PA8 */
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_AFIOEN)
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_AFIORST)
#endif
#define GPIO_USB_BASE GPIOA_BASE
#define GPIO_LED_BASE GPIOA_BASE
#define AFIO_MAPR_SOMETHING AFIO_MAPR_SWJ_CFG_DISABLE
/* NeuG settings for ADC2. */
#define NEUG_ADC_SETTING2_SMPR1 0
#define NEUG_ADC_SETTING2_SMPR2 ADC_SMPR2_SMP_AN1(ADC_SAMPLE_1P5) \
| ADC_SMPR2_SMP_AN2(ADC_SAMPLE_1P5)
#define NEUG_ADC_SETTING2_SQR3 ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) \
| ADC_SQR3_SQ2_N(ADC_CHANNEL_IN2)
#define NEUG_ADC_SETTING2_NUM_CHANNELS 2
|
