From 5f57222b737243b4521e5a887a825c6783ac5bcd Mon Sep 17 00:00:00 2001
From: NIIBE Yutaka <gniibe@fsij.org>
Date: Thu, 26 May 2016 17:40:47 +0900
Subject: Move clk_gpio_init to mcu/
---
mcu/clk_gpio_init-stm32.c | 368 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 368 insertions(+)
create mode 100644 mcu/clk_gpio_init-stm32.c
(limited to 'mcu/clk_gpio_init-stm32.c')
diff --git a/mcu/clk_gpio_init-stm32.c b/mcu/clk_gpio_init-stm32.c
new file mode 100644
index 0000000..50660ea
--- /dev/null
+++ b/mcu/clk_gpio_init-stm32.c
@@ -0,0 +1,368 @@
+/*
+ * clk_gpio_init-stm32.c - Clock and GPIO initialization for STM32.
+ *
+ * Copyright (C) 2015 Flying Stone Technology
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * receipents of GNU GPL by a written offer.
+ *
+ */
+
+#define STM32_SW_HSI (0 << 0)
+#define STM32_SW_PLL (2 << 0)
+#define STM32_PLLSRC_HSI (0 << 16)
+#define STM32_PLLSRC_HSE (1 << 16)
+
+#define STM32_PLLXTPRE_DIV1 (0 << 17)
+#define STM32_PLLXTPRE_DIV2 (1 << 17)
+
+#define STM32_HPRE_DIV1 (0 << 4)
+
+#define STM32_PPRE1_DIV1 (0 << 8)
+#define STM32_PPRE1_DIV2 (4 << 8)
+
+#define STM32_PPRE2_DIV1 (0 << 11)
+#define STM32_PPRE2_DIV2 (4 << 11)
+
+#define STM32_ADCPRE_DIV4 (1 << 14)
+#define STM32_ADCPRE_DIV6 (2 << 14)
+
+#define STM32_USBPRE_DIV1P5 (0 << 22)
+
+#define STM32_MCO_NOCLOCK (0 << 24)
+
+#if defined(MCU_STM32F0)
+#define STM32_PPRE1 STM32_PPRE1_DIV1
+#define STM32_PLLSRC STM32_PLLSRC_HSI
+#define STM32_FLASHBITS 0x00000011
+#define STM32_PLLCLKIN (STM32_HSICLK / 2)
+#else
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_FLASHBITS 0x00000012
+#define STM32_PLLCLKIN (STM32_HSECLK / 1)
+#endif
+
+#define STM32_SW STM32_SW_PLL
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_ADCPRE STM32_ADCPRE_DIV6
+#define STM32_MCOSEL STM32_MCO_NOCLOCK
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+#define STM32_PLLMUL ((STM32_PLLMUL_VALUE - 2) << 18)
+#define STM32_PLLCLKOUT (STM32_PLLCLKIN * STM32_PLLMUL_VALUE)
+#define STM32_SYSCLK STM32_PLLCLKOUT
+#define STM32_HCLK (STM32_SYSCLK / 1)
+
+
+#define PERIPH_BASE 0x40000000
+#define APBPERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000)
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+struct RCC {
+ volatile uint32_t CR;
+ volatile uint32_t CFGR;
+ volatile uint32_t CIR;
+ volatile uint32_t APB2RSTR;
+ volatile uint32_t APB1RSTR;
+ volatile uint32_t AHBENR;
+ volatile uint32_t APB2ENR;
+ volatile uint32_t APB1ENR;
+ volatile uint32_t BDCR;
+ volatile uint32_t CSR;
+#if defined(MCU_STM32F0)
+ volatile uint32_t AHBRSTR;
+ volatile uint32_t CFGR2;
+ volatile uint32_t CFGR3;
+ volatile uint32_t CR2;
+#endif
+};
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x1000)
+static struct RCC *const RCC = ((struct RCC *const)RCC_BASE);
+
+#define RCC_APB1ENR_USBEN 0x00800000
+#define RCC_APB1RSTR_USBRST 0x00800000
+
+#define RCC_CR_HSION 0x00000001
+#define RCC_CR_HSIRDY 0x00000002
+#define RCC_CR_HSITRIM 0x000000F8
+#define RCC_CR_HSEON 0x00010000
+#define RCC_CR_HSERDY 0x00020000
+#define RCC_CR_PLLON 0x01000000
+#define RCC_CR_PLLRDY 0x02000000
+
+#define RCC_CFGR_SWS 0x0000000C
+#define RCC_CFGR_SWS_HSI 0x00000000
+
+#define RCC_AHBENR_CRCEN 0x0040
+
+#if defined(MCU_STM32F0)
+#define RCC_AHBRSTR_IOPARST 0x00020000
+#define RCC_AHBRSTR_IOPBRST 0x00040000
+#define RCC_AHBRSTR_IOPCRST 0x00080000
+#define RCC_AHBRSTR_IOPDRST 0x00100000
+#define RCC_AHBRSTR_IOPFRST 0x00400000
+
+#define RCC_AHBENR_IOPAEN 0x00020000
+#define RCC_AHBENR_IOPBEN 0x00040000
+#define RCC_AHBENR_IOPCEN 0x00080000
+#define RCC_AHBENR_IOPDEN 0x00100000
+#define RCC_AHBENR_IOPFEN 0x00400000
+
+#define RCC_APB2RSTR_SYSCFGRST 0x00000001
+#define RCC_APB2ENR_SYSCFGEN 0x00000001
+#else
+#define RCC_APB2RSTR_AFIORST 0x00000001
+#define RCC_APB2RSTR_IOPARST 0x00000004
+#define RCC_APB2RSTR_IOPBRST 0x00000008
+#define RCC_APB2RSTR_IOPCRST 0x00000010
+#define RCC_APB2RSTR_IOPDRST 0x00000020
+#define RCC_APB2RSTR_IOPERST 0x00000040
+#define RCC_APB2RSTR_IOPFRST 0x00000080
+#define RCC_APB2RSTR_IOPGRST 0x00000100
+
+#define RCC_APB2ENR_AFIOEN 0x00000001
+#define RCC_APB2ENR_IOPAEN 0x00000004
+#define RCC_APB2ENR_IOPBEN 0x00000008
+#define RCC_APB2ENR_IOPCEN 0x00000010
+#define RCC_APB2ENR_IOPDEN 0x00000020
+#define RCC_APB2ENR_IOPEEN 0x00000040
+#define RCC_APB2ENR_IOPFEN 0x00000080
+#define RCC_APB2ENR_IOPGEN 0x00000100
+#endif
+
+#if defined(MCU_STM32F0)
+struct SYSCFG {
+ volatile uint32_t CFGR1;
+ uint32_t dummy0;
+ volatile uint32_t EXTICR[4];
+ volatile uint32_t CFGR2;
+};
+#define SYSCFG_CFGR1_MEM_MODE 0x03
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+static struct SYSCFG *const SYSCFG = ((struct SYSCFG *const) SYSCFG_BASE);
+#endif
+
+struct FLASH {
+ volatile uint32_t ACR;
+ volatile uint32_t KEYR;
+ volatile uint32_t OPTKEYR;
+ volatile uint32_t SR;
+ volatile uint32_t CR;
+ volatile uint32_t AR;
+ volatile uint32_t RESERVED;
+ volatile uint32_t OBR;
+ volatile uint32_t WRPR;
+};
+
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000)
+static struct FLASH *const FLASH = ((struct FLASH *const) FLASH_R_BASE);
+
+static void __attribute__((used))
+clock_init (void)
+{
+ /* HSI setup */
+ RCC->CR |= RCC_CR_HSION;
+ while (!(RCC->CR & RCC_CR_HSIRDY))
+ ;
+ /* Reset HSEON, HSEBYP, CSSON, and PLLON, not touching RCC_CR_HSITRIM */
+ RCC->CR &= (RCC_CR_HSITRIM | RCC_CR_HSION);
+ RCC->CFGR = 0;
+ while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
+ ;
+
+#if !defined(MCU_STM32F0)
+ /* HSE setup */
+ RCC->CR |= RCC_CR_HSEON;
+ while (!(RCC->CR & RCC_CR_HSERDY))
+ ;
+#endif
+
+ /* PLL setup */
+ RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC;
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR & RCC_CR_PLLRDY))
+ ;
+
+ /* Clock settings */
+ RCC->CFGR = STM32_MCOSEL | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE
+ | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
+
+ /*
+ * We don't touch RCC->CR2, RCC->CFGR2, RCC->CFGR3, and RCC->CIR.
+ */
+
+ /* Flash setup */
+ FLASH->ACR = STM32_FLASHBITS;
+
+ /* CRC */
+ RCC->AHBENR |= RCC_AHBENR_CRCEN;
+
+ /* Switching on the configured clock source. */
+ RCC->CFGR |= STM32_SW;
+ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
+ ;
+
+#if defined(MCU_STM32F0)
+ RCC->APB2ENR |= RCC_APB2ENR_SYSCFGEN;
+ RCC->APB2RSTR = RCC_APB2RSTR_SYSCFGRST;
+ RCC->APB2RSTR = 0;
+
+# if defined(HAVE_SYS_H)
+ /* Use vectors on RAM */
+ SYSCFG->CFGR1 = (SYSCFG->CFGR1 & ~SYSCFG_CFGR1_MEM_MODE) | 3;
+# endif
+#endif
+}
+
+
+#if defined(MCU_STM32F0)
+struct GPIO {
+ volatile uint32_t MODER;
+ volatile uint16_t OTYPER;
+ uint16_t dummy0;
+ volatile uint32_t OSPEEDR;
+ volatile uint32_t PUPDR;
+ volatile uint16_t IDR;
+ uint16_t dummy1;
+ volatile uint16_t ODR;
+ uint16_t dummy2;
+ volatile uint16_t BSRR;
+ uint16_t dummy3;
+ volatile uint32_t LCKR;
+ volatile uint32_t AFR[2];
+ volatile uint16_t BRR;
+ uint16_t dummy4;
+};
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000)
+#define GPIOA ((struct GPIO *) GPIOA_BASE)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400)
+#define GPIOB ((struct GPIO *) GPIOB_BASE)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800)
+#define GPIOC ((struct GPIO *) GPIOC_BASE)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00)
+#define GPIOD ((struct GPIO *) GPIOD_BASE)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400)
+#define GPIOF ((struct GPIO *) GPIOF_BASE)
+#else
+struct AFIO
+{
+ volatile uint32_t EVCR;
+ volatile uint32_t MAPR;
+ volatile uint32_t EXTICR[4];
+ uint32_t RESERVED0;
+ volatile uint32_t MAPR2;
+};
+
+#define AFIO_BASE 0x40010000
+static struct AFIO *const AFIO = (struct AFIO *const)AFIO_BASE;
+
+#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP 0x00000800
+#define AFIO_MAPR_SWJ_CFG_DISABLE 0x04000000
+#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE 0x02000000
+
+
+struct GPIO {
+ volatile uint32_t CRL;
+ volatile uint32_t CRH;
+ volatile uint32_t IDR;
+ volatile uint32_t ODR;
+ volatile uint32_t BSRR;
+ volatile uint32_t BRR;
+ volatile uint32_t LCKR;
+};
+
+#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800)
+#define GPIOA ((struct GPIO *) GPIOA_BASE)
+#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00)
+#define GPIOB ((struct GPIO *) GPIOB_BASE)
+#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000)
+#define GPIOC ((struct GPIO *) GPIOC_BASE)
+#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400)
+#define GPIOD ((struct GPIO *) GPIOD_BASE)
+#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800)
+#define GPIOE ((struct GPIO *) GPIOE_BASE)
+#endif
+
+static struct GPIO *const GPIO_LED = ((struct GPIO *const) GPIO_LED_BASE);
+#ifdef GPIO_USB_BASE
+static struct GPIO *const GPIO_USB = ((struct GPIO *const) GPIO_USB_BASE);
+#endif
+#ifdef GPIO_OTHER_BASE
+static struct GPIO *const GPIO_OTHER = ((struct GPIO *const) GPIO_OTHER_BASE);
+#endif
+
+static void __attribute__((used))
+gpio_init (void)
+{
+ /* Enable GPIO clock. */
+#if defined(MCU_STM32F0)
+ RCC->AHBENR |= RCC_ENR_IOP_EN;
+ RCC->AHBRSTR = RCC_RSTR_IOP_RST;
+ RCC->AHBRSTR = 0;
+#else
+ RCC->APB2ENR |= RCC_ENR_IOP_EN;
+ RCC->APB2RSTR = RCC_RSTR_IOP_RST;
+ RCC->APB2RSTR = 0;
+#endif
+
+#if defined(MCU_STM32F0)
+ GPIO_LED->OSPEEDR = VAL_GPIO_LED_OSPEEDR;
+ GPIO_LED->OTYPER = VAL_GPIO_LED_OTYPER;
+ GPIO_LED->MODER = VAL_GPIO_LED_MODER;
+ GPIO_LED->PUPDR = VAL_GPIO_LED_PUPDR;
+
+#ifdef GPIO_OTHER_BASE
+ GPIO_OTHER->OSPEEDR = VAL_GPIO_OTHER_OSPEEDR;
+ GPIO_OTHER->OTYPER = VAL_GPIO_OTHER_OTYPER;
+ GPIO_OTHER->MODER = VAL_GPIO_OTHER_MODER;
+ GPIO_OTHER->PUPDR = VAL_GPIO_OTHER_PUPDR;
+#endif
+#else
+#ifdef AFIO_MAPR_SOMETHING
+ AFIO->MAPR |= AFIO_MAPR_SOMETHING;
+#endif
+
+ /* LED is mandatory. If it's on an independent port, we configure it. */
+ GPIO_LED->ODR = VAL_GPIO_LED_ODR;
+ GPIO_LED->CRH = VAL_GPIO_LED_CRH;
+ GPIO_LED->CRL = VAL_GPIO_LED_CRL;
+
+ /* If there is USB enabler pin and it's independent, we configure it. */
+#if defined(GPIO_USB_BASE) && GPIO_USB_BASE != GPIO_LED_BASE
+ GPIO_USB->ODR = VAL_GPIO_USB_ODR;
+ GPIO_USB->CRH = VAL_GPIO_USB_CRH;
+ GPIO_USB->CRL = VAL_GPIO_USB_CRL;
+#endif
+
+#ifdef GPIO_OTHER_BASE
+ GPIO_OTHER->ODR = VAL_GPIO_OTHER_ODR;
+ GPIO_OTHER->CRH = VAL_GPIO_OTHER_CRH;
+ GPIO_OTHER->CRL = VAL_GPIO_OTHER_CRL;
+#endif
+#endif
+}
--
cgit v1.2.3