From a9de53c36be5ca31974cbf3c7903ca5cf7f7fff2 Mon Sep 17 00:00:00 2001
From: NIIBE Yutaka <gniibe@fsij.org>
Date: Wed, 29 Jul 2015 17:06:17 +0900
Subject: board update, adding ST Dongle

---
 board/board-st-dongle.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 board/board-st-dongle.h

(limited to 'board/board-st-dongle.h')

diff --git a/board/board-st-dongle.h b/board/board-st-dongle.h
new file mode 100644
index 0000000..3ccf025
--- /dev/null
+++ b/board/board-st-dongle.h
@@ -0,0 +1,33 @@
+#define BOARD_NAME "ST Dongle"
+/* echo -n "ST Dongle" | shasum -a 256 | sed -e 's/^.*\(........\)  -$/\1/' */
+#define BOARD_ID    0x2cd4e471
+
+#define STM32F10X_MD		/* Medium-density device */
+
+#define STM32_PLLXTPRE                  STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE              9
+#define STM32_HSECLK                    8000000
+
+#define GPIO_LED_BASE   GPIOA_BASE
+#define GPIO_LED_SET_TO_EMIT            9
+#define GPIO_USB_BASE   GPIOA_BASE
+#define GPIO_USB_SET_TO_ENABLE          15
+#undef  GPIO_OTHER_BASE
+
+/*
+ * Port A setup.
+ * PA0  - input with pull-up.  AN0
+ * PA1  - input with pull-up.  AN1
+ * PA9  - Push pull output 50MHz (LED 1:ON 0:OFF)
+ * PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) 
+ * PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
+ * PA15 - Push pull output 50MHz (USB 1:ON 0:OFF)
+ * ------------------------ Default
+ * PAx  - input with pull-up
+ */
+#define VAL_GPIO_LED_ODR            0xFFFFE7FF
+#define VAL_GPIO_LED_CRL            0x88888888      /*  PA7...PA0 */
+#define VAL_GPIO_LED_CRH            0x38811838      /* PA15...PA8 */
+
+#define RCC_ENR_IOP_EN      RCC_APB2ENR_IOPAEN
+#define RCC_RSTR_IOP_RST    RCC_APB2RSTR_IOPARST
-- 
cgit v1.2.3